Author Topic: Cat6 FTP inconsistency  (Read 353 times)

spannerman

  • Newbie
  • *
  • Posts: 2
Cat6 FTP inconsistency
« on: September 24, 2018, 04:48:21 PM »
Hi, Don't know if I'm doing it wrong - Terminated 10 cables in the wall ports, terminated 10 cables in the patch panel, as far as I can tell, all are ok. Testing connections with the PE and wiremap module,
Cable 1, broken 3 and 6 wires
2, short circuit 2 and 7
3, no connection
4, no connection
5, no connection
6, 4 pairs ok
7, 4 pairs ok
8 broken wires
9 shoirt circuit
10 etc...

Re-tested with a 40 tester from high-street supplier, all cables are fine.
Is the PE over-sensitive ?
Does it need recalibrating for cat6?
Is there a setting I should be selecting ?