Author Topic: New beta version v30 (issues)  (Read 749 times)

Tom

  • Newbie
  • *
  • Posts: 8
New beta version v30 (issues)
« on: July 27, 2018, 12:05:18 AM »
Thanks for the update however still can not get a link on Cisco 2960 was this addressed in this update?

Tom

  • Newbie
  • *
  • Posts: 8
Re: New beta version v30 (issues)
« Reply #1 on: August 10, 2018, 10:57:57 AM »
All good now with a replacement unit.

eits

  • Jr. Member
  • **
  • Posts: 54
Re: New beta version v30 (issues)
« Reply #2 on: August 13, 2018, 09:29:06 AM »
replaced the switch or the pockey?  :P

Katybuy

  • Newbie
  • *
  • Posts: 2
Re: New beta version v30 (issues)
« Reply #3 on: August 24, 2018, 04:34:05 AM »
the update however still can not get a lin

Tom

  • Newbie
  • *
  • Posts: 8
Re: New beta version v30 (issues)
« Reply #4 on: August 24, 2018, 11:20:04 AM »
I had a faulty pockethernet - all tests work with my replacement unit.

dloeliger

  • Newbie
  • *
  • Posts: 17
Re: New beta version v30 (issues)
« Reply #5 on: August 27, 2018, 09:15:19 AM »
Wiremap issue https://forum.pockethernet.com/index.php?topic=235.0 is not fixed with this firmware.

abramsgunner

  • Newbie
  • *
  • Posts: 2
Re: New beta version v30 (issues)
« Reply #6 on: September 07, 2018, 06:55:15 PM »
NVM, wrong thread...
« Last Edit: September 07, 2018, 06:59:10 PM by abramsgunner »

DfrgSeb

  • Newbie
  • *
  • Posts: 1
Re: New beta version v30 (issues)
« Reply #7 on: September 19, 2018, 06:22:26 PM »
Hi, since beta v30 update, EBR test show no result, text box Send/Error/Ratio still blanck.

allenrowand

  • Newbie
  • *
  • Posts: 3
Re: New beta version v30 (issues)
« Reply #8 on: September 19, 2018, 06:54:09 PM »
Hi, since beta v30 update, EBR test show no result, text box Send/Error/Ratio still blanck.

I had the same issue, tried rolling back firmware to 29 with no change. Once I also rolled the Android app back to release BER worked as expected.