Author Topic: Need more wire map terminators?  (Read 938 times)


  • Newbie
  • *
  • Posts: 32
Need more wire map terminators?
« on: November 08, 2017, 06:30:57 AM »
If anyone needs more wire map terminators, I am now making and selling them.  See:

 - These substantially reduce your time walking between the wall jacks and the patch panel if you just load up a bunch of jacks with terminators and then only have to move Pockethernet around on the opposite end.

 - These can be a replacement if you lost or left behind your genuine Pockethernet terminator.

 - These can be a replacement if you fried your genuine Pockethernet terminator by plugging it into a passive or legacy POE PSE port, or a T1/T3 smart-jack by mistake.  P.S. don't do that.

 - These are drastically cheaper then comparable options like the Fluke CableIQ Remote Identifier Kit, yikes!

If you want to build your own, you can do that too:

If you want to see a video how I'm doing it, look here:

P.S. If you attempt to build your own, you can't possibly break your Pockethernet by plugging in a "not quite right" terminator, but you can get erroneous/bad results/readings when running the wiremap test - bad results can be frustrating - as are forum posts complaining of malfunction when not admitting to using your own terminator, that can be misleading - for these reasons, I would encourage you to TEST, TEST, TEST any self-made terminators before using in the field - my terminators are quadruple tested: a) direct connection after soldering b) direct connection after glue and shrink-wrap c) connection via 100ft patch cord d) direct connection again before shipping to you.
« Last Edit: November 08, 2017, 06:39:00 AM by JP »


  • Newbie
  • *
  • Posts: 9
  • Powered by ethernet
    • Homepage
Re: Need more wire map terminators?
« Reply #1 on: November 08, 2017, 08:57:19 AM »
Completely passive, who'd have thought...
I'm going to try to make one with the resistors in the 8P8C plug.
I brake... For lanparties!
... Also: can't apply avatar settings on this forum.


  • Jr. Member
  • **
  • Posts: 50
Re: Need more wire map terminators?
« Reply #2 on: November 16, 2017, 10:10:57 AM »
just ordered a twelve-pack - thanks@jp ;)