Author Topic: Need more wire map terminators?  (Read 3061 times)

JP

  • Newbie
  • *
  • Posts: 36
Need more wire map terminators?
« on: November 08, 2017, 06:30:57 am »
If anyone needs more wire map terminators, I am now making and selling them.  See: http://jpelectron.com/hardware

 - These substantially reduce your time walking between the wall jacks and the patch panel if you just load up a bunch of jacks with terminators and then only have to move Pockethernet around on the opposite end.

 - These can be a replacement if you lost or left behind your genuine Pockethernet terminator.

 - These can be a replacement if you fried your genuine Pockethernet terminator by plugging it into a passive or legacy POE PSE port, or a T1/T3 smart-jack by mistake.  P.S. don't do that.

 - These are drastically cheaper then comparable options like the Fluke CableIQ Remote Identifier Kit, yikes!

Updated 04/04/2020 please see more recent post:  https://forum.pockethernet.com/index.php?topic=357.msg1747
« Last Edit: April 05, 2020, 05:58:48 am by JP »

BjornR1989

  • Newbie
  • *
  • Posts: 9
  • Powered by ethernet
    • Homepage
Re: Need more wire map terminators?
« Reply #1 on: November 08, 2017, 08:57:19 am »
Completely passive, who'd have thought...
I'm going to try to make one with the resistors in the 8P8C plug.
I brake... For lanparties!
... Also: can't apply avatar settings on this forum.

eits

  • Jr. Member
  • **
  • Posts: 69
Re: Need more wire map terminators?
« Reply #2 on: November 16, 2017, 10:10:57 am »
just ordered a twelve-pack - thanks@jp ;)