Author Topic: Wiremap Issues  (Read 7627 times)

avalonav

  • Newbie
  • *
  • Posts: 1
Re: Wiremap Issues
« Reply #30 on: September 13, 2018, 05:54:39 PM »
hi i am new.  just got PE.  maybe i should have read this thread first.  without proper BER and wiremap on longer cables, i have lost the major function i bought the PE for.  i bought it to test long cable runs.  Can PE get these issues resolved please?

on a about 700 foot cable i got an ok wiremap test but an error on BER test saying loopback connector not connected, when of course it was. short cables work ok.

Lexnutter

  • Newbie
  • *
  • Posts: 1
Re: Wiremap Issues
« Reply #31 on: September 14, 2018, 03:58:35 PM »
Hi,

I'm having issues with wire map too - if I connect to a switch I get various errors saying there are shorts (on ports I know are OK). I am also getting some random results (occasionally different results with the same cable) when using the wire-map connector.

Is it not possible to do a wire-map back to a switch?


glinch

  • Newbie
  • *
  • Posts: 4
Re: Wiremap Issues
« Reply #32 on: October 05, 2018, 11:42:50 AM »
Hi

I am having issues also, and it appears to be on the longer runs of cable.

Issues such as showing "Misswire" but the status of the 4 pairs is OK - when using these tested cables they work fine.

Hardware Version: 6
Firmware version: 29
App Version 2.8a

AndrewMediaTek

  • Newbie
  • *
  • Posts: 1
Re: Wiremap Issues
« Reply #33 on: October 05, 2018, 11:09:34 PM »
Brand new out of the box days ago, October 1, 2018.  Using the included, shielded patchcord or brand new patch cords it says Miswire cable lead 2 (orange/white) is open.  I have a Samsung Note 8 with latest firmware and downloaded the PE app just as the product arrived.  I didn't know this was even an issue.  Regretting my purchase now.  I need help.

glinch

  • Newbie
  • *
  • Posts: 4
Re: Wiremap Issues
« Reply #34 on: October 10, 2018, 05:16:36 PM »
Whats the process for getting this issue fixed?

marcelmah

  • Newbie
  • *
  • Posts: 6
Re: Wiremap Issues
« Reply #35 on: October 10, 2018, 05:20:10 PM »
I don't think it every will... there have been 0,000000 response on the forums or mails.

glinch

  • Newbie
  • *
  • Posts: 4
Re: Wiremap Issues
« Reply #36 on: October 11, 2018, 12:22:46 AM »
I've messaged them on facebook, will let you know if I get a result.

glinch

  • Newbie
  • *
  • Posts: 4
Re: Wiremap Issues
« Reply #37 on: October 12, 2018, 12:11:37 AM »

Daniel26

  • Newbie
  • *
  • Posts: 3
Re: Wiremap Issues
« Reply #38 on: October 16, 2018, 08:45:25 AM »
The pockethernet project seems to be dead....
Pity about the money

dinohead

  • Newbie
  • *
  • Posts: 1
Re: Wiremap Issues
« Reply #39 on: October 24, 2018, 03:29:05 PM »
Added myself to this - just got it and get the same short circuit for everything I test. Newest firmware too.


florianr

  • Newbie
  • *
  • Posts: 1
Re: Wiremap Issues
« Reply #40 on: October 28, 2018, 10:34:18 AM »
Hallo zusammen,

hier auch ein Problem beim Test Wiremap und BER mit dem Remote-Adapter.

Ich habe festgestellt, dass sich die Mess-Ergebnisse mit dem mitgelieferten Kabel oft verändern. Mit dem mitgelieferten Kabel konnte ich folgende Wiremap Ergebnisse erzielen:

- Misswire Pair 3 and 4
- Misswire Pair 3
- OK (Straight)

Der BER-Test findet bei Speed 1000 mit dem mitgelieferten Kabel meist den Loopbackadapter nicht, bei Speed 100 schon. Bei Speed 100 werden dann aber keine Fehler angezeigt. Einmal konnte ich mit dem mitgelieferten Kabel ein positives Testresultat für Wiremap und BER@1000 messen.

Mit meinen eigenen Patchkabeln habe ich dagegen immer positive Messresultate erzielt, sowohl für Wiremap, als auch BER@speed 1000. Unklar ist damit natürlich, wie zuverlässig die Messergebnisse meiner Installation damit sind ...