Author Topic: Pockethernet can check ULTRA POE  (Read 1401 times)

RobyF

  • Newbie
  • *
  • Posts: 1
Pockethernet can check ULTRA POE
« on: December 16, 2016, 12:30:39 AM »
Pockethernet can check ULTRA POE
Ultra PoE solution use the same cabling standard as IEEE 802.3at / af PoE. Instead of delivering power over 2-pair twisted UTP – be it End-Span ( Pin 1,2,3 and 6 ) or Mid-Span ( Pin 4,5,7 and 8 ). It provides the capability to source up to 60 watts of power by using all the four pairs of standard Cat5e / Cat6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs.

Pair 1 End-Span: 1/2(+), 3/6(-)
Pair 2 Mid-Span: 4/5(+), 7/8(-)