Author Topic: Strange test results  (Read 1833 times)

Blackbird_71

  • Newbie
  • *
  • Posts: 13
Strange test results
« on: October 12, 2016, 09:51:21 pm »
About a month before the announcement I noticed that all my results were not as I expect. every cable was testing bad.
After updating the firmware and app today. I notice that, again, every cable was testing with a 0m tdr and open. the wiremap would change depending on what is plugged into the other end. but nothing from a switch on link or a computer.  I am starting to believe that my PE has been damaged in some way.  Any steps I can try to fix it?

Jack

jboxtel

  • Full Member
  • ***
  • Posts: 157
Re: Strange test results
« Reply #1 on: October 17, 2016, 11:30:29 am »
Hi Jack. Did you already do a hard reset? (Press the power button for 10 seconds, and then connect the USB plug)

Blackbird_71

  • Newbie
  • *
  • Posts: 13
Re: Strange test results
« Reply #2 on: October 19, 2016, 11:04:25 pm »
https://app.box.com/s/805lr126y3jhlgtrqipsotv3p85knl3v

I have done as requested. With the power off, I press and hold the power button for 10 Sec. then ran the f/w update, again.   same issues.