Pockethernet Forum

General => Feature Suggestions => Topic started by: Zoltan on July 27, 2018, 12:15:08 AM

Title: Version v30 feedback
Post by: Zoltan on July 27, 2018, 12:15:08 AM
Please post your feedback here
Title: Re: Version v30 feedback
Post by: ShadowLord on July 27, 2018, 08:26:35 AM
Hi,

Normally I'm using an iPhone to do my measurements so no v30 for me yet :(
I do have an Android Phone that I use for experimenting/playing around with that I could use to test v30 with. However, if I update the Pockethernet to v30 would I still be able to use it with the old iPhone app when I don't have the Android Phone around? The Android's battery tends to run out rather quickly :)
Title: Re: Version v30 feedback
Post by: knlx on July 27, 2018, 08:28:54 AM
I remember a tweet of you guys saying that IPv6 support was scheduled for first half of 2018. What is about that? I did not see anything in the changelog.
Title: Re: Version v30 feedback
Post by: Mike1233 on July 27, 2018, 11:51:37 AM
I have used this version now for a couple of times and it works for me. No connexion problems with the Android phone. I can get no connexion to the network if I use a fixed ip adres.. I think I do something wrong.
Is it also possible to change the mac adres of the PE to check if a fixed ip ades at the router is given to a specific mac adres?
Title: Re: Version v30 feedback
Post by: Mike1233 on July 29, 2018, 02:11:53 AM
If i test a couple of things to test my report is messed up. When is test TDR, PoE, Link, DHCP and CDP/LLDP the text of the names is written trough the results og the test.
Title: Re: Version v30 feedback
Post by: Leec232 on July 30, 2018, 02:30:34 AM
Hi everybody
New version works perfectly for me its great, good job. The only thing I see is the report comes out a bit messed up at the mo and not as clear and defined as the old version but I assume this is something you are aware of.
Title: Re: Version v30 feedback
Post by: JP on July 30, 2018, 02:51:54 AM
- Bluetooth connection seems faster (tested on Pixel 2 XL)

- Wiremap works good, better that there is no "OK" next to every pair, not thrilled that it still doesn't point out the mis-matched wires easily (you still have to take time to inspect the numbers left and right for what's wired wrong)

- DHCP did not work 1st try - changed setting to 60sec, worked.  Changed back to 10sec, worked.  Can't re-produce problem on this particular network.  DHCP server is a firewall (hardware) device, not a server in this case.

- When testing External IP, app crashed, said lost connection to Pockethernet - I had to power it off/on again to reconnect.
...problem here is corporate Internet filter was blocking "ip-api.com" as a security risk (IP address display sites are commonly used by viruses and you need to anticipate that may be blocked, and exit gracefully with an error)

- Ping, to server 1 works, server 2 never resolves, app crashed, said lost connection to Pockethernet - I had to power it on/off again to reconnect.
Tried a second time, both worked
Tried a third time, server 1 works, server 2 never resolves, app crashed,  said lost connection to Pockethernet - I had to power it on/off again to reconnect.

- CDP/LLDP is no longer reporting the VLAN I'm in, or the switch details when in an access port, or trunk port.

I'll post more details as I discover it.

Title: Re: Version v30 feedback
Post by: jmone on August 03, 2018, 02:24:52 AM
Just received my Pockerthernet and updated the firmware and map.  Could be a newbie issue but:
- BER does not seem to work.  The arrows spin but no results are displayed.  Tried a few cables and all the BER setting
- Blinker does not seem to work.  My switch always stays on Gigabit and the light flashes (but not in a regular pattern) regardless of the settings in Blinker.  The switch I tested it on is a Unifi 48 Port POE

Rest is looking pretty good so far.

Thanks
Nathan
Title: Re: Version v30 feedback
Post by: stsch69 on August 08, 2018, 10:38:01 PM
Hallo,

das liegt wohl an der App.
Ich habe die beta Firmware mit mit der "normalen" App unter Android und iOS probiert: BER hat funktioniert. mit der Beta App unter Android ging es nicht.

LG
Steffen
Title: Re: Version v30 feedback
Post by: Smakodak on August 20, 2018, 02:31:23 PM
Nexus 5x - Android 8.1.0 security patch august.
DHCP not stable.
BER not working.

I agree with stsch69. Installed the "old" app, and all is working.
Title: Multiple reports Re: Version v30 feedback
Post by: spannerman on August 27, 2018, 03:29:45 PM
Hi we have updated the pocket ethernet with the beta version. We are having trouble producing the reports , a single report from multiple tests.
On the iphone it seems to email out single reports only.
what are we doing wrong?>
Thanks
Title: Re: Version v30 feedback
Post by: dloeliger on August 28, 2018, 03:09:01 PM
Wiremap doesn't work better than V29 - longer cables fail
BER has same problems
Title: Re: Version v30 feedback
Post by: kevin.taylor on September 07, 2018, 09:10:25 AM
Hello, testing on Samsung Note 8 - BER test no longer works
No MAC address showing in INFO, No Hardware Info, No Firmware issue :'(
Title: Re: Version v30 feedback
Post by: abramsgunner on September 07, 2018, 07:03:37 PM
Same as Kevin, no BER with  fw 30 and app 30.   I get results if I reinstall and use the 2.8a app instead (even with the 30 firmware).

also, under 30 App...No MAC address showing in INFO, No Hardware Info, No Firmware listed.   All info present with 2.8a app and 30 fw.

LG G5 phone,  Android 6.0.1
Title: Re: Version v30 feedback
Post by: bishop on September 10, 2018, 08:40:10 PM
https://pockethernet.com/PE_firmware/android-app-test/pockethernet_android_app_v30a.apk

scores 1/60 @ Virustotal

AhnLab-V3    Android-PUP/Malct.7ff0f    20180910

guess false positive.

whitelist?
Title: Re: Version v30 feedback
Post by: andyrogers on September 13, 2018, 12:37:13 AM
Hi

Just received my pockethernet today, and initial impressions are very good.

Been testing also with V30 firmware, and my main issue is the report just looks awful compared to the v29.
v29 was alot tidy, everything sperated out.
V30 is just all squashed togeather and really is a mess
Title: Re: Version v30 feedback
Post by: crism3rd on September 21, 2018, 08:45:23 PM
If switch have LLDP information, the pdf report format gets missed up.
Title: Re: Version v30 feedback
Post by: jacksonc on October 02, 2018, 10:21:22 AM
TDR graph still showing scale in meter when it's set to feet.


Title: Re: Version v30 feedback
Post by: Mike1233 on October 06, 2018, 09:25:04 PM
Testing on Samsung S9 - BER test no longer works
No MAC address showing in INFO, No Hardware Info, No Firmware issue.
Tis on V30
Title: Re: Version v30 feedback
Post by: BBatchelor on October 21, 2018, 09:22:13 PM
V30 for IOS WHEN WILL WE BE ABLE TO DOWNLOAD IT? Anxiously awaiting!!
Title: Re: Version v30 feedback
Post by: ck90 on October 24, 2018, 08:16:24 PM
hi there,

just got mine today.
updated firmware to v30

but when im trying to use the newest .apk (v30) BER seems not to work. the symbol is turning one or two times then it will stop without any error or message.
Just got back the App from Playstore and now BER working fine.

Android Device: Xiaomi Mi A 1 with Android 8.1.0
btw, i see mac adress in info with apk v30....
Title: Re: Version v30 feedback
Post by: BBatchelor on November 12, 2018, 06:20:28 PM
Please post the new version pockethernet ios 30 beta version Id love to test it. Please post a link to download and try it !
Title: Re: Version v30 feedback
Post by: thulley on December 04, 2018, 09:47:40 PM
Is there timeframe for V30 to be moved from beta to general release (and the app updated in Google Play)?