Author Topic: No Link  (Read 94 times)

GregL

  • Newbie
  • *
  • Posts: 3
No Link
« on: September 08, 2017, 04:15:04 PM »
Hi,
I wrote about issue with Wire Map on long cables (more then 5m). I did an IP camera network checkup and all of the CAT.6 cables 30-70m showed "Link Down" but showed that PoE is 52V. Cameras work with no problem. Conventional wire map tester showed that all pairs were ok.
My Pockethernet is:
HW: 6
FW: 29
APP: 2.6i

Would you be so kind to correct this issue please.

Greg

jboxtel

  • Administrator
  • Full Member
  • *****
  • Posts: 130
Re: No Link
« Reply #1 on: September 12, 2017, 01:27:48 PM »
Hi Greg. You are using the wiremap adapter for the wiremap test, right?

GregL

  • Newbie
  • *
  • Posts: 3
Re: No Link
« Reply #2 on: September 13, 2017, 05:52:24 AM »
Right. But for "link up" test the wire is connected to switch.